Description
Wireless fire detector with temperature sensor that monitors security in the room twenty four hours a day and immediately notifies of smoke and sharp jumps in temperature. The device detects smoke by means of a camera with photoelectric sensor. If no smoke is emitted, the additional detector registers temperature increase in the room. It can operate independently from the hub, emitting a fire alarm by means of a built-in siren. Several detectors indicate an alarm simultaneously.
Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
Tech specs
- Radio channel smoke detector with temperature sensor and built-in siren
- Wireless
- Indoors
- Operates independently or with Hub, Hub Plus, Hub 2, Rex, uartbridge and ocBridge Plus
- Photoelectric and temperature sensors
- +59°С ±2°С
- Sound/light
- 85 dB Volume of siren
- Alarm signal delivery time 0.15 s
- Battery: Two CR2 batteries
- Power supply voltage: 3 V
- Battery life — up to 4 years Backup battery: CR2032
- Jeweller radion technology; Communication range with central unit — up to 1,300 m in an open space
Two-way communication between devices
Operating frequencies — 868.0-868.6 MHz
Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Detector polling period — 12−300 s - Permmisable humidy Up to 80%
- Protection against fraud
- Jamming detection
- Tamper-resistant
- 132х132×31 mm
- Warranty within 12 months of the date of sale. Batteries are not covered under warranty.
Reviews
There are no reviews yet.